-40%

Proxmark 3 V2 RDV DEV Kits Device RFID Reading Tags with HID S50 Card

$ 65.95

Availability: 28 in stock
  • Brand: Unbranded/Generic
  • Improved antennas: LF antenna: 35.23 V @ 125.00 kH
  • Improved antennas 4: HF antenna: 24.08 V @ 13.56 MHz
  • Improvement: More information
  • 512KB of dual bank flash memory: AT91SAM7S512 instead of AT91SAM7S256 on V1
  • Refund will be given as: Money back or exchange (buyer's choice)
  • Improved antennas 2: LF antenna: 27.64 V @ 134.00 kHz
  • Condition: New
  • MPN: Does Not Apply
  • Improved antennas 3: LF optimal: 35.39 V @ 127.66 kHz
  • All returns accepted: Returns Accepted
  • Model: Proxmark 3 V2
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days

    Description

    Description
    Proxmark3 V2 DEV kits Open Source Device RFID Reading Tags
    Product Description:
    Latest Upgrading (2016.09.21 Thanks to Corey Harding):
    1. Instructions for Standard/Proxmark 3 RDV2 Emulating/Cloning/Proxbrute HID Tags in Standalone Mode
    2.
    Source file and compiled firmware
    Mifare Hack Video
    Proxmark3 V2 is upgraded from  Proxmark3 V1. You could know more from the V1 page.
    What is improved on V2:
    Improvement
    More information
    Improved antennas
    LF antenna: 35.23 V @ 125.00 kHz
    LF antenna: 27.64 V @ 134.00 kHz
    LF optimal: 35.39 V @ 127.66 kHz
    HF antenna: 24.08 V @ 13.56 MHz
    512KB of dual bank flash memory
    AT91SAM7S512 instead of AT91SAM7S256 on V1
    Add power indicator LED
    Enhanced antenna wires
    Improved shell
    Install the antenna on the shell
    Note: the tale above doesn't include all tags it supports. To learn  (it is impossible for us to test all).
    all the tags in the market
    Reference:
    1.Basic document
    Download Manual
    Assemble instruction
    Software pm3-bin-2.0.0
    2. Video instruction
    Video: how to install driver
    Video: how to install driver
    Video: how to upgrade firmware
    Video: how to read/write Mifare classic
    Video: how to hack/clone Mifare classic
    Video: how to clone EM410x tags
    3. Official wiki
    Proxmark3 official wiki (new)
    Proxmark3 official wiki (old)
    The Proxmark has proven itself to be an invaluable tool within the research community. Here are some examples of how the Proxmark has been used to perform research:
    Proxmark3: The Swiss Army Knife of Security Research
    Exploring the NFC Attack Surface
    A Practical Attack on the MIFARE Classic
    Analysis of the MIFARE Classic used in the OV-Chipkaart project
    Potential Misuse of NFC Enabled Mobile Phones with Embedded Security Elements as Contactless Attack Platforms
    Outsmarting Smart Cards
    Evaluation of the feasible attacks against RFID tags for access control systems
    The Proxmark also makes a great educational tool. The entire platform (including hardware and software) is open source and can be readily analyzed and inspected. The Proxmark includes many of the major components found in a general purpose SDR but is simpler and therefore easier to understand. Faculty members should contact us about educational discounts if interested in incorporating the Proxmark into a course of study.
    WARNING:
    The Proxmark3 is a research and development tool. It has not been evaluated for compliance with regulations governing transmission and reception of radio signals. You are responsible for using this product in compliance with your local laws.
    Product List
    A. Standard Kits
    Protection cases assembled.
    Items
    Qty.
    Note
    Proxmark 3 main board
    1
    LF antenna
    1
    HF antenna
    1
    MMCX antenna cables
    2
    Micro-USB cable
    1
    Connecting Proxmark to PC
    Mifare 1 S50 white PVC card
    1
    13.56Mhz
    Mifare Ultralight white PVC card
    1
    13.56Mhz
    Mifare UID white PVC card (Chinese Magic Card)
    1
    13.56Mhz
    HID tag
    1
    125Khz
    T5577 tag
    1
    125Khz
    EM4X tag
    1
    125Khz
    Proxmark PCB protection shell
    1
    2 boards
    Copper pillar and screws package
    1
    To install the protection cases
    Shipping Terms
    - For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
    Custom Duties & Taxes
    1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
    2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.