NEW - GE SIMON XT 600-1054-95R SUM4T WIRELESS SECURITY SYSTEM ALARM PANEL BOARD

Description

Simon XT is a cost-effective security system that offers up to 40 zones of burglary and fire protection, and which complies with SIA False Alarm Standards. With a built-in display touchpad and a status speaker that provides visual and voice messages for feedback, Simon XT is well suited for houses, apartments, and condominiums. Optional GSM reporting and alarm.com features support off-premises telephone control to arm and disarm the system, check system status, activate no-entry delay, or activate the latchkey feature. The Simon XT panel comes standard with 40 wireless zones, or it can be set up with 38 wireless zones and two built-in hardwired supervised burglary zones normally-closed loop only. The built-in radio receiver works with both crystal and SAW LearnMode sensors. Simon XT supports convenient system operation from anywhere within the premises with the use of wireless Two-Way Talking Touch Screens and/or touchpads. Choose from the Remote Handheld Touchpad, two-, four-, or five-button crystal or SAW Keychain Touchpads keyfobs, or two-button ELM Keychain Touchpad. When powered by the optional line carrier transformer, adding X10-based modules lets customers control lights, appliances, and other devices. Simon XT can send messages to a central monitoring station using SIA or Contact ID CID formats. The panel can also report alarms to another land-line phone location or cell phone using Voice Event Notification. Built-in two-way voice capability with VOX VoiceActivated Switching provides additional security and emergency contact with the control monitoring station.
Features
40 wireless zones - two can be hardwired normally-closed loop only
Built-in PSTN 2-way voice capability over GSM with optional module
Supports both crystal and SAW LearnMode sensors
Supports repeaters
Supports 2-way RF products version-specific
Indoor and outdoor motion sensors
Chime feature for monitoring door, window, or motion activity
1 master access code and 8 programmable user access codes of 3 to 6 digits
SIA or CID central station reporting formats and Voice Event Notification reporting via PSTN native and/or optional GSM and IP modules
Programmable No Activity and No Usage report features
Meets SIA False Alarm Standards
100-event buffer with time-and-date stamp
Panel voice and beeps that can be disabled
Program panel with built-in touchpad or Enterprise Downloader software v3.4 or later
Firmware flash upgrades can be done remotely
Expansion options
– Internet-based interactivity with third-party providers
– Support for on-premises remote control with optional talking touchpad accessory
Specs
Manufacturer Utc Fire & Security
Condition New
Required transformer: Class II, 9 VAC, 3.34A, 60 Hz 60-899, 60-899-CN in Canada
Fuse: Non-replaceable transformer fuse
Backup batteries: 6 VDC, 1.2 Ah lead acid 60-914
Backup time: 24 hours fully charged
Battery test: 10 seconds under load every 4 hours
Type: SAW-controlled superheterodyne
Frequency: 319.5 MHz/ Bandwidth 350 kHz
Sensitivity: 110 dBm nominal
Nom. range without GSM module present: 1000-ft. open-air receiving range
Nom. range with GSM module present: approx. 500-ft. open-air receiving range
Dialing: DTMF or pulse
Modem: Modified Bell 103 110 or 300 bps
Telephone interface: Line seizure relay
Total input zones: 40 or 38 wireless and 2 hardwire normally-closed loop only
Auxiliary power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA maximum @ 10 VDC
Siren output: 1 Hardwire Interior Siren 5.1 to 9 VDC
Digitization type: Continuous Variable Slope Delta CVSD Modulation
Playback rate: 88,200 bits/second
Operating temperature: 32 to 122°F 0 to 49°C
Relative humidity: 90% max., non-condensing
Color: White
Dimensions LxWxD: 5.7 x 7.05 x 2.1 in. 144 x 179 x 53 mm
Installation: Wall mount
Construction, chassis: ABS
FCC: Part 15, Part 68
UL: 985, 1023, 1635/ULC Listing ORD-C102319-74,ULC-S545-M89
CSFM: California State Fire Marshall CP01