-40%

Handheld RFID NFC Card Copier Reader Writer Duplicator with ID Cards and Keyfobs

$ 36.42

Availability: 10 in stock
  • Refund will be given as: Money Back
  • Country/Region of Manufacture: China
  • Model: ZX-08CD
  • Restocking Fee: No
  • Condition: New
  • Item must be returned within: 30 Days
  • MPN: Does not apply
  • Return shipping will be paid by: Buyer
  • Type: RFID Card Copier
  • Brand: Does not apply
  • All returns accepted: Returns Accepted

    Description

    Document
    Features
    HD 3.2 inch full color screen, clear display; ID/IC full-band, English voice broadcast
    Powered by 4 AAA batteries or use with USB power supply (
    The battery is not included, and please buy it separately.
    )
    Supports card copying frequency: 125KHz, 250KHz, 375KHz, 500KHz, 625KHz, 750KHz, 875KHz, 1000KHz, <13.56MHz; Supports card writing: EM4305/5200/8800/T5577/UID Card
    Can crack sector encryption card. (This device doesn't work for fully-encrypted cards. By its decoding software, it may work for most half-encrypted IC cards, but not all. Please confirm with us before purchasing.)
    Typical Applications: elevator card, access control system, parking card, proximity card, etc
    IC firewall penetration
    How to Crack Encryption 13.56Mhz Cards
    When the 13.56mhz cards have encrypted, it should be using the software to crack the cards.
    Connected with copier with computer via USB cable, then Press the "on/off" button.
    Then the copier will be show the "Disclaimer" page, and don't press any button on the Copier, then your computer will show a removable disk.
    Open the disk, there are the manual and the software, press the button "OK" to agree with the Disclaimer on the computer firstly, then agree with the copier's "Disclaimer" page, that's will be connect successfully.
    Put your original cards on the back side of the Read/Write area, then press the button "scan" to crack the passwords.
    After 2 or 5 minutes, the passwords will be cracked successfully, then put one UID cards in the read/write area, then press "write“ button, that will be ok.
    How to Copy the 125khz RFID Cards
    Press the "on/off "button, put the original 125khz cards on the back of the copier.
    Then the copier will be show the "Disclaimer" page, press "ok" button, then put the cards on the back side of the copier.
    Then press "scan", then the copier will auto scan it is 125khz cards, and the copier will show the card number.
    Then we put one writable EM4305 key on the back side of the copier, then press "Write", then that will be write successfully.
    Package
    1 x RFID Card Copier
    1 x USB Cable
    5 x 125KHz ID Cards
    5 x 125KHz EM4305 Keyfob
    5 x 13.56MHz UID Keyfob