0-6M Long Distanct Embedded UHF Reader Writer Module Uart TTL ISO18000 6C

Description

Notice:Using cr80
9662
standard card to test the farthest recognition distance can reach 6M, which is only for reference.
Europe 865-868mhz,
USA  902-928mhz.
Please leave a message if you have other requirements.
Notice:"Without antenna" opyion means that the reader you receive does not contain an antenna, and you need to prepare the antenna yourself.
Excellent reading performance
Label identification is sensitive and stable.
Stable recognition distance of 2-3 meters.
Multi-tag recognition performance: >50 labels.
Label recognition speed: >50 sheets / sec.
Solve the problem of heat completely
No external heat sink is required.
Long-term continuous full-load operation at room temperature does not cause heat.
Continuous current
Peak pulse current
Excellent stability
24 hours x 365 days of work does not crash.
The performance is affected by external influences such as the outer casing and electromagnetic environment.
Wide temperature design, the temperature drift coefficient is extremely low.
Excellent consistency
A model of consistent design.
All components of the highest grade are selected to ensure stable and consistent parameters.
Simple and efficient hardware and software interface
The peripheral circuit is extremely simple, single power supply, no external tantalum capacitor. (See Figure 1: Reference Design
Meter circuit).
Installation method
Support 5pin WAFER installation.
Operating voltage DC 3.5V - 5 V
Standby current <80ma (en high level)>
Sleep state current <100ua (en foot low level)>
Operating current 180mA @ 3.5V (26 dBm Output, 25°C).
110mA @ 3.5V (18 dBm Output, 25°C).
Start time <100ms. >
Operating temperature - 20 °C - + 70 °C
Storage temperature - 20 °C - + 85 °C
Operating humidity < 95% ( + 25 °c) 95%="" (="" +="" 25="">
Air Interface Protocol EPCglobal UHF Class 1 Gen 2 / ISO 18000-6C
Working spectrum range 840-960MHZ
Work area support US, Canada and other regions following U.S. FCC
Europe and other regions following ETSI EN 302 208
Mainland China
Japan
Korea
Malaysia
Taiwan
Output power range 18-26 dBm
Output power accuracy +/- 1dB
Output power flatness +/- 0.2dB
Receive sensitivity < -70dbm>
Inventory label peak speed > 50 sheets / sec
Tag Cache 200 Labels @ 96 bit EPC
Label RSSI support
Communication interface TTL Uart interface
Communication baud rate 115200 bps (default and recommended)
38400bps
Cooling method Air cooling (no external heat sink required)
PIN definition
1 GND ground
High level enable module (>1.5V)
2 EN
3 RXD TTL level (3.3V)
TTL level (3.3V)
4 TXD
5 VCC power supply (3-5V)